Hunter Systems
 
Home |  Up |  Catalog |  Info |  Search |  View Cart |  Checkout |  Send Mail |   

  STORE SECTIONS

 

  1/12th Body Shells

We have the UK's largest selection of Body Shells.

 

  CARDS ACCEPTED

 

Miscellaneous
Hunters Emporium  > Miscellaneous

Bilge Pump Controller TM Bilge Pump Controller TMNew
This unit when connected to a pump and a DC power source will sense if water seeps into the Model.
The unit will then activate the attached pump and this will empty any ingress of water in the model.
Input voltage 6 - 12 volts
A 6 volt Pump can be supplied seperately - see 'Submersible Pump'
 


Price:   £21.95
Submersible Pump Submersible Pump
A low cost 6 volt water pump suitable for a wide range of project
applications - from automatic watering systems to model water jet boats.
It is also very compatible with our Bilge Pump Controller for just pumping water as a Bilge Pump.
Size is 60mm high and 30mm dia.
Weighs 35g

The pump is sealed and can safely be fully immersed in a water reservoir.
 
Click here for larger image

Price:   £10.95
Motor Suppressor Kit Motor Suppressor Kit
 


Price:   £1.30
Radar Drive Radar Drive
Drives your Radar Scanner at approx. 42 rpm on a single AA battery. The unit can also be used as a standalone winch by increasing the voltage input.
Input voltage is 1.2 - 6 volts.
Very Powerful. 


Price:   £10.00
Colour Wireless Miniture Pinhole CCTV Camera Colour Wireless Miniture Pinhole CCTV Camera
A Miniture WIRELESS Colour CCTV Camera
This is the smallest camera around.
What’s Included in the Package:-
Wireless Camera + 2 x Battery Adapters (Not batteries)
(1 for the Receiver & 1 for the Camera) + Receiver + 1.2 METER A/V Lead.
Specification.
Image Device?1/3 OmniVision CMOS
Valid Pixel?PAL:628X582
Horizontal Definition?320Line
Scan Frequency?PAL: 50Hz
Minimum Illumination?3Lux/F1.2
Power Supply? DC 9V/200mA. Output frequency:1.2G
Receiver 9 - 12V DC
 
Click here for larger image

Price:   £54.95

OUT OF STOCK
Discrete Ultra Low Dropout B.E.C. 1amp x 5 volts Discrete Ultra Low Dropout B.E.C. 1amp x 5 volts
The BEC unit will allow the use of main batteries to provide power to the receiver or to supply any project that requires a power supply of 5 volts @ 1 amp.
MINIMUM INPUT VOLTAGE: 5.5 volts.
MAXIMUM INPUT VOLTAGE 24 volts without heatsink
(30 volts with heat sink).
OUTPUT VOLTAGE: 5 volts @ 1 amp. 


Price:   £6.25
Discrete Ultra Low Dropout B.E.C. 3amp x 5 volts Discrete Ultra Low Dropout B.E.C. 3amp x 5 volts
The BEC unit will allow the use of main batteries to provide power to the receiver or to supply any project that requires a power supply of 5 volts @ 3 amp. THIS IS A MUCH HIGHER CURRENT.
MINIMUM INPUT VOLTAGE: 5.5 volts.
MAXIMUM INPUT VOLTAGE 24 volts without heatsink
(30 volts with heat sink).
OUTPUT VOLTAGE: 5 volts @ 3 amp.
This item is plugged on both leads - Red JST for the Receiver and Tamtech for the Battery.
 


Price:   £10.95
Discrete Ultra Low Dropout B.E.C. 3amp x 12 volts Discrete Ultra Low Dropout B.E.C. 3amp x 12 volts
The BEC unit will allow the use of main batteries to provide power to the receiver or to supply any project that requires a power supply of 12 volts @3 amp.
MINIMUM INPUT VOLTAGE: 14 volts.
MAXIMUM INPUT VOLTAGE 24 volts without heatsink
(30 volts with heat sink).
OUTPUT VOLTAGE: 12 volts @ 3 amp.
This item is plugged on both leads with Tamtech Connectors for the item to be powered at 12 volts and for the Battery.
 


Price:   £10.95
Power Distribution Boards TM Power Distribution Boards TM
This board is designed to end a lot of the problems you have when laying out the electrics in a model or when you come to add additional circuits at a later date.
The unit will switch up to 3 seperate circuits.
Each board is fitted with power in/out terminals plus switches plus fuses.
Two versions are available.
AUXILLARY - for lights -sounds-small motors, plus.
POWER - Speed Controllers/drive motors, plus.  


Price:   £13.95

Type
Trim Adjuster Trim Adjuster
These are the trim adjusters that have proved so popular in the past. Adjust your trim pots the safe and easy way.
You know it makes sense!! 


Price:   £2.25
Smoke Generator TM Smoke Generator TM
This unit when connected to a 12 volt 7 amp battery supply and filled with 10 ml of smoke oil will smoke heavily for a long period.
The unit is 50 x 38 x 28mm and is constructed of Box alluminium with a 3/8th dia. brass smoke stack.
When on, draws approx. 1.7 amps
Comes with free starter bottle of oil. 


Price:   £29.95
Smoke Oil Smoke Oil
Smoke Oil for Smoke Generator, bottle contains 125 ml of oil which is sufficient for approx. 30 hours. 


Price:   £2.40
12 Volt Fan 12 Volt Fan
A 12 volt PC type fan to increase smoke output from Smoke Generator.
Size is approx. 2" x 2" 


Price:   £2.95
Hunters Emporium  > Miscellaneous
Hunter Systems 01323 503336

  CART DETAILS


 

  Site Certificate