 | V1 - Chassis
Aluminium pre-drilled and counter sunk.
Click here for larger image
Price: £3.95
|
|
|
 | V1B -Banger Chassis
Aluminium pre-drilled and counter sunk for Banger Racing
TEMP OUT OF STOCK
Click here for larger image
Price: £3.95
|
OUT OF STOCK |
|
| | V5A - Nylon Wishbones
Nylon Wishbones
Mardave 2008 price increase.
Click here for larger image
Price: £1.45
|
|
|
 | V5C - Battery Retaining Blocks and Screws
Click here for larger image
Price: £0.95
|
|
|
 | V5D - Servo Mounts, 2 off
Click here for larger image
Price: £0.95
|
|
|
 | V6A - Kingpin/Hingepin - standard
Price is for a pair of Metal Kingpins
Click here for larger image
Price: £0.95
|
|
|
| | V6B - Steering Arms and Stub Axles
Price is for a pair of Metal Stub Axles with integrated plastic Steering Arms.
Mardave 2008 price increase.
Click for larger image.
Price: £2.45
|
|
|
 | V6BM Stub Axle only
Sold as a pair.
Price: £1.95
|
OUT OF STOCK |
|
 | V6C - Front Coil Springs
The price is for a pair of Metal Front Coil Springs.
Click here for larger image.
Price: £0.75
|
|
|
 | V6CH - Front coil springs HARD
Front coil springs in HARD.
NO LONGER RED IN COLOUR..
Please click here for Larger Image
Price: £1.25
|
|
|
 | V6CM - Front coil springs MEDIUM
Front coil springs in medium hardness.
NOW LONGER YELLOW IN COLOUR.
Please click here for Larger Image
Price: £1.25
|
|
|
 | V7A - Track Rods only
Pack size is 2.
Click here for larger image.
Price: £1.20
|
|
|
 | V7B - Steel Ball Screw and Nuts
Pack size is 2
Click here for larger image.
Price: £1.25
|
OUT OF STOCK |
|
 | V7C3 - Nylon Ball Sockets for 3mm Track Rods
Click here for larger image.
Price: £0.75
|
|
|
 | V7MOD- Track Rod Assembly. New Modification
This is the new much stronger modification.
Inc. V7AM Track rod threaded, 2 off. V7BM Ball screw, 2 off. V7CM Plastic ball socket, 2 off
Please click here for Larger Image
Price: £2.95
|
|
|
 | V8A - Nylon Motor Mount Mouldings
Motor mount mouldings, pair.
Click here for larger image.
Price: £1.95
|
|
|
 | V8B - Nylon Rear Motor Pivot Plate
Click here for larger image.
Price: £1.45
|
|
|
| | HS8C - Rear Motor Mount Bracing Plate
This GRP Plate will brace the Motor Mount and stop any top movement. Ideal for those rear end shunts!!
Supplied with four screws.
Click here for larger image.
Price: £1.95
|
|
|
 | V8D - Rear Pivot Plate 'O' Rings
Pack contains 5 'O' Rings.
Click here for larger image.
Price: £0.75
|
|
|
 | V8E - Nylon axle bushes, 2 off.
Made from Nylon 6 - tuff!
.
Price: £1.25
|
|
|
 | V8EB - Rear Axle Ball Raced Bearing
They now come as a pair.
Click here for larger image.
Price: £4.45
|
|
|
 | V8F - Upgrade Motor Screw Set
V12 Motor mount high tensile cap heads & allen key set.
Click here for larger image.
Price: £1.45
|
|
|
 | V9A - Rear Pivot Plate Ballnut & Screws.
Click here for larger image.
Price: £0.99
|
|
|
 | V9B - Rear Pivot Plate Guide Pin & Screws.
Click here for larger image.
Price: £1.25
|
OUT OF STOCK |
|
 | V9C - Standard Rear Coil Springs.
Click here for larger image.
Price: £0.75
|
|
|
 | V9CF - V12 Firmer Rear Coil Springs
V12 Firmer rear coil springs for stiffer back end suspension.
Click here for larger image.
Price: £0.95
|
|
|
 | V10 - Rear Axle
Price: £3.45
|
|
|
| | V10M - Banger Body Mount
The new mount by Mardave. Fabricated in black nylon.
Price: £2.95
|
OUT OF STOCK |
|
| | V11B - Nylon Rear Axle Spacer
This is item was part of the original spur gear set - now in its own pack.
Price: £0.95
|
OUT OF STOCK |
|
 | V1146 - Spur Gear 46 Tooth
The new 46 tooth spur gear for the Mardave V12 - faster than the standard 50 tooth Spur Gear.
Price: £1.75
|
|
|
| | V1148 - Spur Gear 48 Tooth
The new 48 tooth spur gear for the Mardave V12 - faster than the standard 50 tooth Spur Gear. Slower than the 46 tooth Spur Gear.
Price: £1.75
|
|
|
| | V1150 - Spur Gear 50 Tooth
V11A 50 Tooth Spur gear.
Price: £1.75
|
|
|
| | V13 - Speed Controller complete (V Series)
Mardave 2008 price increase.
Price: £12.95
|
|
|
| | V13A - Printed circuit board.
Price: £1.95
|
|
|
 | V13B - Plastic disc & copper wiper contacts.
Mardave 2008 price increase
Price: £1.65
|
|
|
 | V13C - Servo Linkage Rod & Nylon Ball Socket
Mardave 2008 price increase.
Price: £1.25
|
|
|
| | V13D - Resistors, pair.
Mardave 2008 price increase.
Price: £1.45
|
|
|
| | V13E - 2.5mm Screws, spacer & washers.
Mardave 2008 price increase.
Price: £1.45
|
|
|
| | HS13G - Mech. Speedo. Mounting Posts TM
These are the post that support the aluminium plate that the speedo resides on.
These posts are slightly higher to allow the battery pack to slide in a bit easier.
Hunter Systems Manufacture.
.
Price: £0.85
|
|
|
 | HS13H - Mechanical Speedo Aluminium Plate. Standard TM
Lightweight Speed Control/Battery Holder. Fabricated by Hunter Systems from 1mm Aluminium sheet.
Weight is 18g.
Price: £1.95
|
|
|
 | HS13S - Banger Mechanical Speedo Aluminium Plate. Strong TM
Strong Speed Control/Battery Holder. Fabricated by Hunter Systems from 1.5mm Aluminium sheet.
Weight is 35g.
The extended plate incorporates Top Motor Protection - ideal for Bangers.
Price: £3.95
|
|
|
| | V13J - Dynamic Brake Resistor
Fits to V13 Mechanical speedo.
TEMP. OUT OF STOCK
Price: £1.25
|
|
|
 | V14 - Battery Holder Mountings
Price: £1.75
|
|
|
 | V15 - Mardave/Manic Bumper Kit NEW
This is the new bumper kit. Fabricated in Silver/Grey Nylon.
Picture to follow.
Price: £4.50
|
|
|
| | G2 - RS540-SH Motor
This is the 23 turn 'Hot-Up' Motor sold by Mardave.
Why not try out our very popular HS3 Motor
Faster than the G2 but not BRCA approved at the moment (If you want it approved and you are a BRCA member then ask your Club Secretary to put it forward to your BRCA committee.
Price: £8.95
|
OUT OF STOCK |
|
 | HS3 - RS540-SF THE FAN MOTOR TM
This is the from the same Manufacturer as the RS540-SH motor, hotter - with more revs. for your volts plus a built-in cooling fan = lower pulled amps. This 27 turn motor will out perform the RS540-SH and will run cooler.
This spec will allow you to happily run lower priced ESC's such as the ECO27 and Marine 15.
Now with Leads and Suppression built in!!
Faster than the G2 but not BRCA approved!! at the moment (If you want it approved and you are a BRCA member then ask your Club Secretary to put it forward to your BRCA committee.
We have sold many thousands of these motors to V12 drivers and as far as we know they are liked by all - apart from the BRCA Committee.
Now used on Team Hunter Cars.
These are not Mardave supplied.
<Click Here for Spec.>
Click here for Larger Image
Price: £9.95
|
|
|
| | HS40 - RED Multi-FIN Motor Heatsink with Fan - NEW
This Multi- Fin Red coloured MOTOR HEATSINK with attached FAN will clip onto any 540/545 motor, to help reduce built-up heat when racing.
Manufactured by HobbyPro
Picture to follow.
Now used on our Team Cars.
Price: £4.95
|
|
|
| | HS41 - BLUE Multi-FIN Motor Heatsink with Fan - NEW
This Multi- Fin Blue coloured MOTOR HEATSINK with attached FAN will clip onto any 540/545 motor, to help reduce built-up heat when racing.
Manufactured by HobbyPro
Picture to follow.
Now used on our Team Cars.
Price: £4.95
|
|
|
| | G4WORLDS - Two Part Motor Heatsink
As used by C. Wilkinson.
This item is to order only - delivery will be slightly longer.
Price: £17.95
|
|
|
| | Pinion Drive Gear.
The Pinion is now available in various number of teeth.
10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 teeth
Price: £2.25
|
|
|
 | G10 - 10 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | G11 - 11 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | G12 - 12 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | G13 - 13 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | G14 - 14 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | G15 - 15 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | G16 - 16 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | G17 - 17 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | G18 - 18 Tooth Pinion 32DP
Price: £2.25
|
|
|
 | V16 - Servo Saver Bell Crank Unit
Click here for larger image.
Price: £1.25
|
|
|
 | V17 - Aerial Pack
Price: £1.45
|
|
|
| | HS11 - Aerial Tubes TM
These are a new design available in eight different colours Blue, Green, Orange, Purple, Red, Yellow and Pink, complete with retaining cap.
Price is for one tube.
This is a new much lower price for such a superior product.
See HS25 for Holders.
Price: £1.95
|
Colour
|
|
 | HS25 - Aerial Tube Holder Mounting Pack TM NEW ITEM
This item has been designed for that age old problem of holding the Aerial tube upright on the chassis.
Constructed out of 8mm Nylon Rod with a screw hole at one end to screw to the chassis. The other end has a hole just large enough to take the Aerial wire and tube as a snug fit.
Comes complete with a screw and washer.
Does not include Tube.
Price: £1.95
|
|
|
| | V18 - Exhaust Pipe Rear Body Mount Pack - NEW Pack
Inc. V18A Rear plate, 1 off. V18B Exhaust pipe, 2 off.
This pack is also used with the Willys Coupe and the VW Camper van.
.
Price: £2.25
|
|
|
 | V18C - Body Mount Hooked Plate only
Price: £0.85
|
|
|
| | V19 - Body Posts - 60mm.
Mardave's Black molded round posts with screws - Two in a pack.
This will be replacing the oringinal method of locking the body to the chassis.
Or try our own HS4 to HS13 manufactured from Nylon 66 Rod - From £1.40
Price: £1.80
|
OUT OF STOCK |
|
 | HS19A - Very Small Body Clips (5) TM
Used on the V12, Mini Stox, 1/18th and Cobra plus many other cars.
Price: £0.75
|
|
|
 | HS19B - Standard Body Clips (10) TM
Used on the V12, Mini Stox and Caterham7 plus many other cars.
Ten in a pack. 1.2mm wire Diameter - plated.
Price: £0.95
|
|
|
 | HS19C - Large Body Clips (5) TM
Used on 1/8th and 1/5th cars
Price: £2.50
|
|
|
 | HS4 40mm Body Post Kit TM
For the very low bonnets etc..
This set comprises two of each of the following :-
40 mm posts 6mm diameter
Body Clips
Self Tapping Screws
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £1.40
|
|
|
| | HS4A 40mm Front Banger Body Post Kit TM - NEW
For the very low bonnets etc..
This set comprises:-
40 mm posts 8mm diameter x 2 VERY STRONG!
Body Clips x 4
Self Tapping Screws x 2
THESE ARE NON-MARDAVE SUPPLIED
PICTURE TO FOLLOW.
Click here for larger image
Price: £1.80
|
|
|
| | HS5 60mm Body Post Kit TM
For the very low bonnets etc..
This set comprises two of each of the following :-
60 mm posts 6mm diameter
Body Clips
Self Tapping Screws
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £1.50
|
|
|
| | HS4B 60mm Front Banger Body Post Kit TM - NEW
For the Bangers
This set comprises :-
60 mm posts 8mm diameter x 2 - VERY STRONG!!!
Body Clips x 4
Self Tapping Screws x 2
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £1.90
|
|
|
 | HS6 70mm Body Post Kit TM
For the higher bonnets on Bangers etc.
This set comprises two of each of the following :-
70 mm posts 6mm diameter
Body Clips
Self Tapping Screws
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £1.60
|
|
|
| | HS6A 70mm Front Banger Body Post Kit TM
For the higher bonnets on Bangers etc.
This set comprises :-
70 mm posts 6mm diameter x 2
Body Clips x 4
Self Tapping Screws x 2
Manufactured by Hunter Systems
Click here for larger image
Price: £2.00
|
|
|
| | HS7 80mm Body Post Kit TM
For the higher bonnets on Bangers and the rear hatches etc.
This set comprises two of each of the following :-
80 mm posts 6mm diameter
Body Clips
Self Tapping Screws
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £1.70
|
|
|
| | HS7A 80mm Front Banger Body Post Kit TM - NEW
For the Bangers
This set comprises :-
80 mm posts 8mm x 2 diameter - VERY STRONG!!!
Body Clips x 4
Self Tapping Screws x 2
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £2.10
|
|
|
| | HS8 90mm Body Post Kit TM
For the higher bonnets on Bangers and the rear hatches etc.
This set comprises two of each of the following :-
90 mm posts 6mm diameter
Body Clips
Self Tapping Screws
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £1.80
|
|
|
 | HS8A 90mm Front Banger Body Post Kit TM - NEW
For the Bangers
This set comprises :-
90 mm posts 8mm diameter x 2 - VERY STRONG!!!
Body Clips x 4
Self Tapping Screws x 2
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £2.20
|
|
|
 | HS35 120mm Banger/Vans Body Post Kit TM - NEW
Long ones for Vans and Estates etc.
This set comprises :-
120 mm posts 8mm diameter x 2
Body Clips x 4
Self Tapping Screws x 2
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £2.50
|
|
|
| | HS9 140mm Banger/Vans Body Post Kit TM
Long ones for Vans and Estates etc.
This set comprises :-
140 mm posts 8mm diameter x 2
Body Clips x 4
Self Tapping Screws x 2
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £2.50
|
|
|
 | HS10 Mixed Pack of 6mm Body Posts TM
Made up from HS4-HS5-HS6-HS7-HS8
This set comprises two of each of the following :-
40 mm posts 6mm diameter x 2
60 mm posts 6mm diameter x 2
70 mm posts 6 mm diameter x 2
80 mm posts 6mm diameter x 2
90 mm posts 6mm diameter x 2
Body Clips x 10
Self Tapping Screws x 10
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £7.80
|
|
|
| | HS10A Mixed Pack of 8mm Banger Body Posts TM - NEW
Made up from HS4A + HS5A + HS6A + HS7A + HS8A + HS9A
This set comprises two of each of the following :-
40 mm posts 8mm diameter x 2
60 mm posts 8mm diameter x 2
70 mm posts 8 mm diameter x 2
80 mm posts 8mm diameter x 2
90 mm posts 8 mm diameter x 2
140 mm posts 8 mm diameter x 2
Body Clips x 12
Self Tapping Screws x 12
THESE ARE NON-MARDAVE SUPPLIED
Click here for larger image
Price: £12.00
|
|
|
 | HS12 - Wheel Nut Spinner TM
A well made hand tool for spinning on & off M3 wheel nuts and 3mm nuts.
Price: £3.00
|
|
|
 | V22 - V-Dub Window Decal Sheet.
Price: £2.25
|
|
|
 | HS24 - Curved Scissors for Body Shells TMNEW ITEM
Excellent quality Curved Scissors
Specifically designed for cutting & shaping clear plastic and ABS
(used for R/C car bodies)
The blades are stainless steel with comfortable plastic handles.
Price: £3.95
|
|
|
 | HS33 - M3 Plain Nuts TM
Pack contains 20 nuts.
Price: £0.65
|
|
|
 | HS34 - M3 Wheel Lock Nut TM
Pack contains 10 Captive wheel nuts.
Price: £0.65
|
|
|
 | HS36K - All screws for V12 Kit TM
Our own assembled pack contains suffecient screws and fastners to build a V12 kit.
E clips not included - see V35
Price: £2.95
|
|
|
 | V35 - M3 'E' Circlips.
Price: £0.75
|
OUT OF STOCK |
|
 | V39 - 1.5 mm Key plus Grub Screw
1.5mm Allan Key & 3mm Grub Screw
MARDAVE 2008 PRICE INCREASE
Price: £1.25
|
|
|
 | V61 - Peugeot/VW Old Beetle Wing Kit.
This kit is used on the Peugeot 205 Hot Rod Body and the VW Beetle old style body
Price: £2.20
|
|
|
 | V62 - Peugeot 205 Rear Body Mount Kit.
Price: £2.75
|
|
|
 | V63 - Peugeot 205 Widow Decal Sheet.
Price: £1.75
|
|
|
 | V71 - Ford Rear Body Mount Kit
This kit fits the Nastruck, Euro-Truck and all of the longer body shells.
Price: £2.75
|
|
|
 | V72 - Ford Window Decal Sheet.
This decal set is also used on the Nastruck, Fiesta and Euro-Truck and of course the Ford RS Turbo.
Price: £1.75
|
|
|
 | V91 - Megane Rear Body Mount Kit
Price: £2.75
|
|
|
| |
